Seal O grip air inflatable pneumatic tube seal union tire

A Hammer Union comprises of a thread end, a nut end and a hammer nut which, when cinched up, compresses a composite seal assembly thereby preventing leakage. The seal assembly comprises a metal insert of a size to pass into the seal groove of conventional hammer unions and a small seal acting between the insert, the thread end and the nut end. The small seal is conveniently an O-ring or a Hammer Union Seal (Lip Seal) and is of a size that is compressed when the seal assembly is inserted into the thread end of the hammer union, thereby preventing the seal assembly from falling out of the threaded end when it is inverted.
Some profiles such as Fig 100, Fig 200 Fig 206, Fig 300 etc require a Hammer Union Lip Seal or an 'O'Ring depending on the Size of the Hammer Union.
We produce Hammer Union Seals (Lip Seals) for Standard Service in NBR, FKM/Viton and HNBR. The manufacturing process is closely monitored so as to gurantee the correct hardness and composition.
We also produce special Hammer Union Seals (Lip Seals) in materials that resist explosive decompression for safety and reliability. We manufacture compatible Hammer Union Seals for Weco Hammer Union Seals and Guiberson Hammer Union Seals.

                                                                       Seal-O-Grip Unions
w/ Nitrile Pneumatic Tube

Recommended service:

Mud suction and return lines and low-pressure fluid lines

Features:

1. Shot of rig air inflates tube to seal around pipe

2. Fast, easy make-up without close alignment

3.Allows pipe expansion or misalignment without breaking the seal

4. No nuts, bolts, or wrenches required

In the Air Grip Unions(Air-O-unions) we have patents:

1. Medium available: mud, oil, water

2. Medium temperature: -45°C ~50°C

3. Reconversion time when deflated: 1-3 seconds.

4. Medium presssure: 0.4Mpa

5. Structure: steel shell and air bag

6. Material: shell for 20# casting steel, tyre for rubber.